Cropico 3000 SERIES Instruções de Operação descarregar pdf (Página 24)

[ ]



Operating Instructions

Microhmmeter Type DO5000

The following parameters will be stored when saved to memory:-

PARAMETER DEFAULT VALUE

Range 30kOhm range

Auto-range on - auto 1

Current direction positive

Current Magnitude 100%

Current mode DC

Trigger mode continuous

Reading rate slow

Temperature compensation off

Temperature compensation mode manual

Temperature compensation material copper

Manual compensation temperature 20∞C

Filter off

Filter - No of readings 10

Measurement limits off

Measurement limits alarm on

Measurement limit - maximum 30 kOhm

Measurement limit - minimum 0

Open circuit limit off

Log mode off

Log mode - No. of readings stored 10

4.8 Display Menu

Press [MENU] to select the display menu

Press [RESET] to reset measurement configuration to default values.

Press [MEM] to select memory menu

Press [LCD] to select LCD display menu, Press to turn backlight ON or OFF, Press and

hold [ [] ] to lighten then display contrast, Press and hold [ ® ] to darken the display contrast.

Press [Set Up] to select the configuration menu. [Beep] turns the beeper on and off, [Time

Date] enables the current time and date to be set, [Lang] enables the display to be toggled

between English and French language, [Temp Unit] permits the temperature units to be

switched between ˚C and ˚F, [Line Freq] allows the measurements to be synchronized at 50Hz

or 60Hz and should be set in accordance with mains supply frequency used, this is particularly

important when measuring in fast mode. Press [Ver] to display the model number and software

version.

Press [Rem I/F] to select the remote interface option menu

Press [Key Lock] to select the option of locking the keyboard to ensure no parameters are

changed without authorisation. You will be asked to enter a pass code before you can enter

this menu. The default pass code is 9252 and this can be changed once you have entered the

Key Lock menu. Three options are available [ALL] enables all keys and permits normal control

of the DO5000. [MEM] permits operation of the Memory, Recall, and Measure Keys only.

[Measure] restricts operation to the Measure Key only. Once the Key Lock facility is enabled

the measurement screen will display a small padlock symbol in the bottom right hand corner.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comentários a estes Manuais

Sem comentários

Cropico 3000 SERIES Instruções de Operação Página 24

Comentários a estes Manuais