Cropico 3000 SERIES Instruções de Operação descarregar pdf (Página 10)

3000.doc Iss. 2/00

WARNING: STATS will only be calculated and displayed from values held in the log, and

will only be displayed when the stored log values are all for the same channel. If different

channel readings have been stored the STATS is invalid . It is also important to be aware that

changing the probe characteristics settings during logging will invalidate any STATS

displayed.

A minimum of 2 readings in this log is required to complete the STATS.

MEM This key will take you into a menu with the options Cal or Log. The Cal option takes you

into the instrument calibration routine and the Log into the data logging function.

fig.8: Mem menu

SCAN..DATALOG FUNCTIONS

To set a scan sequence and store values in the datalog enter SCAN option the display will read

Select Scan from the menu to set up the scan sequence

Four different scanning lists labeled SL1 to SL4 may be set up to be stored and recalled for later use,

Select the list to be edited using the Edt key

A0 Pt100 EN60741 R0 = 100.000 a = 3851 4wre

+ 100.000

-------------------------------------------------------------------------------

Scanner is : off Memory is : off

Scan Timer Mem Quit

A0 Pt100 EN60741 R0 = 100.000 a = 3851 4wre

+ 100.000

-------------------------------------------------------------------------------

Scanning list is : off

SL1 SL2 SL3 SL4 Edt Off

Quit OK

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

Cropico 3000 SERIES Instruções de Operação Página 10